• Registrador de Corrente BDA01


    Pode ser usado para registrar sinais de qualquer transmissor de qualquer grandeza que trabalhe com saida de sinal em 4 a 20mA.

    Sensor de corrente

    Faixa do sensor interno: 4~20mA

    Exatidão: 1% ± 1 count

    Resolução: 0.05mA

    Capacidade de registros: 64 Kbytes

    Entre em contato para obter mais informações ou consulte o Data Sheet, arquivo disponível para download.

    Tel. / Fax: (11) 5096-4654

    Caracteristicas Técnicas

    Temperature:Measurement range :-35~80(-31~176)Accuracy(Typ.)Figure 1:±0.5(±0.9)

    Resolution:0.1 / 0.2 Long Term


    Memory Capacity:64KBytes(Total 32,000 readings for all channels)

    Sample Rate:Can be selected from 10 seconds to 12 hours

    Start Method:Immediately, Start by button, and Start at date&amp,time

    Stop Method:Stop when memory full, overwrite when memory full, stop by button, and stop until specified number of sample points finished

    Sample Mode:Instant(default), average, maximum and minimum This will decide how to dispose data at idle time between a sample interval

    Button:Software config to start logging bybutton, or clear and reset LED alarm when LED alarm is hold LED

    Red&amp,green LED: Logger Status indication(Include Delay to Start, Logging, Alarm, Finished) (Sofware can disable this two LED for saving power)

    Yellow LED: Low battery indication

    Alarm:User programmable high or low alarm limit for each channel(If necessary) LED alarm and hold Communication Direct USB connection Need to install the driver provided on CD PC

    Software:DGraphTM software and USB driver required (Included on CD) (Compatible with Windows XP, Windows Vista, Windows 7&amp,8(32 bit &amp, 64bit Versions)) Use these software to setup, download, view graph and analyse data Power

    Supply:User replaceable 1/2AA 3.6V Lithium Battery 1200mAh NOTE: USB interface can supply power directly if necessary Battery Life:Approx. 2 Years @ 1 Minute Sample Rate Approx. 4 Years @ 10 Minute Sample Rate Approx. 8 Years without any sample task NOTE: It also Depends on ambient temperatures and using of LEDs Operating Range:0 to 100%RH -35 to 80(-31 to 176)

    Storage Range Recommended: 20 to 60%RH 10 to 50(50 to 122)

    Case Material:ABS, TPU, PC

    Registrador de Corrente BDA01